ISO 4010 to ISO 4957: International Standards List

INTERNATIONAL STANDARDS: ISO 9000, ISO 27000, ISO 14000, ISO.......
THE ISO STANDARDS GLOSSARY

This glossary of international standards is designed to provide a ready reference for those seeking the title of international standards.

Menu
Home
ISO 1 to ISO 1998
ISO 2002 to ISO 2982
ISO 3001 to ISO 3994
ISO 4010 to ISO 4957
ISO 5007 to ISO 5991
ISO 6009 to ISO 6989
ISO 7004 to ISO 7998
ISO 8009 to ISO 8995
ISO 9000 to ISO 9999
ISO 10000 - 14997
To ISO 20000 +

Contact
Other Standards


Standard Vendors

International standards can now be obtained from a number of online sources. For major standards, one of the most will known is the BSI outlet:
ISO Standards

For less common standards, BSI provide the following:
ISO Source Page



ISO 4010 to ISO 4957


ISO 4010:1998
Diesel engines. Calibrating nozzle, delay pintle type

ISO 4014:2001
Hexagon head bolts. Product grades A and B

ISO 4016:2001
Hexagon head bolts. Product grade C

ISO 4017:2001
Hexagon head screws. Product grades A and B

ISO 4018:2001
Hexagon head screws. Product grade C

ISO 4020:2001
Road vehicles. Fuel filters for diesel engines.Test methods

ISO 4023:1995
Rubber hoses for steam. Test methods

ISO 4032:2001
Hexagon nuts, style 1. Product grades A and B

ISO 4033:2001
Hexagon nuts, style 2. Product grades A and B

ISO 4034:2001
Hexagon nuts. Product grade C

ISO 4035:2001
Hexagon thin nuts (chamfered). Product grades A and B

ISO 4036:2001
Hexagon thin nuts (unchamfered). Product grade B

ISO 4037-1:1996
X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy. Radiation characteristics and production methods

ISO 4037-2:1997
X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy. Dosimetry for radiation protection over the energy ranges 8 keV to 1, 3 MeV and 4 MeV to 9 MeV

ISO 4037-3:1999
X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy. Calibration of area and personal dosemeters and the measurement of their response as a function of energy and angle of incidence

ISO 4042:2000
Fasteners. Electroplated coatings

ISO 4044:1998
Leather. Preparation of chemical test samples

ISO 4045:1998
Leather. Determination of pH

ISO 4046-1:2002
Paper, board, pulps and related terms. Vocabulary. Alphabetical index

ISO 4046-2:2002
Paper, board, pulps and related terms. Vocabulary. Pulping terminology

ISO 4046-3:2002
Paper, board, pulps and related terms. Vocabulary. Paper-making terminology

ISO 4046-4:2002
Paper, board, pulps and related terms. Vocabulary. Paper and board grades and converted products

ISO 4046-5:2002
Paper, board, pulps and related terms. Vocabulary. Properties of pulp, paper and board

ISO 4047:1998
Leather. Determination of sulphated total ash and sulphated water-insoluble ash

ISO 4048:1998
Leather. Determination of matter soluble in dichloromethane

ISO 4049:2000
Dentistry. Polymer-based filling, restorative and luting materials

ISO 4057:1986
Information processing. Data interchange on 6,30 mm (0.25 in) magnetic tape cartridge, 63 bpmm (1600 bpi) phase-encoded

ISO 4063:2000
Welding and allied processes. Nomenclature of processes and reference numbers

ISO 4064-2:2001
Measurement of water flow in closed conduits. Meters for cold potable water. Installation requirements and selection

ISO 4065:1996
Thermoplastics pipes. Universal wall thickness table

ISO 4066:2000
Construction drawings. Bar scheduling

ISO 4074:2002
Natural latex rubber condoms. Requirements and test methods

ISO 4080:1995
Rubber and plastics hoses and hose assemblies. Determination of permeability to gas

ISO 4087:1991
Micrographics. Microfilming of newspapers for archival purposes on 35 mm microfilm

ISO 4090:2001
Photography. Medical radiographic cassettes/screens/films and hard-copy imaging films. Dimensions and specifications

ISO 4093:1999
Diesel engines. Fuel injection pumps. High-pressure pipes for testing

ISO 4096:1978
Essential oils (containing tertiary alcohols). Evaluation of free alcohols content by determination of ester value after cold formylation

ISO 4097:2000
Rubber, ethylene-propylene-diene (EPDM). Evaluation procedure

ISO 4115:1997
Air cargo equipment. Air/land pallet nets

ISO 4118:2000
Air cargo equipment. Non-certified lower-deck containers for air transport. Specification and testing

ISO 4119:1996
Pulps. Determination of stock concentration

ISO 4126-2:2003
Safety devices for protection against excessive pressure. Bursting disc safety devices

ISO 4135:2001
Anaesthetic and respiratory equipment. Vocabulary

ISO 4142:2002
Laboratory glassware. Test tubes

ISO 4157-1:1999
Construction drawings. Designation systems. Buildings and parts of buildings

ISO 4157-2:1999
Construction drawings. Designation systems. Room names and numbers

ISO 4157-3:1999
Construction drawings. Designation systems. Room identifiers

ISO 4161:1999
Hexagon nuts with flange. Coarse thread

ISO 4165:2003
Road vehicles. Electrical connections. Double-pole connection

ISO 4168:2002
Timekeeping instruments. Conditions for carrying out checks on radioluminescent deposits

ISO 4172:1997
Technical drawings. Construction drawings. Drawings for the assembly of prefabricated structures

ISO 4190-1:1999
Lift (US: Elevator) installation. Class I, II, III and VI lifts

ISO 4190-2:2001
Lift (US: Elevator) installation. Class IV lifts

ISO 4241:2001
Cinematography. Theatre projection leader, trailer and cue marks. Specifications

ISO 4246:1994
Cinematography. Vocabulary

ISO 4256:1998
Liquid petroleum products. Determination of gauge vapour pressure. LPG method

ISO 4257:2001
Methods of test for petroleum and its products. Liquefied petroleum gases. Method of sampling

ISO 4259:1996
Petroleum products. Determination and application of precision data in relation to methods of test

ISO 4263-2:2003
Petroleum and related products. Determination of the ageing behaviour of inhibited oils and fluids. TOST test. Procedure for category HFC hydraulic fluids

ISO 4264:1997
Methods of test for petroleum and its products. Petroleum products. Calculation of cetane index of middle-distillate fuels by the four-variable equation

ISO 4266-1:2002
Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods. Measurement of level in atmospheric tanks

ISO 4266-2:2002
Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods. Measurement of level in marine vessels

ISO 4266-3:2002
Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods. Measurement of level in pressurized storage tanks (non-refrigerated)

ISO 4266-4:2002
Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods. Measurement of temperature in atmospheric tanks

ISO 4266-5:2002
Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods. Measurement of temperature in marine vessels

ISO 4266-6:2002
Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods. Measurement of temperature in pressurized storage tanks (non-refrigerated)

ISO 4267-2:1996
Petroleum and liquid petroleum products. Calculation of oil quantities. Dynamic measurements

ISO 4268:2000
Petroleum and liquid petroleum products. Temperature measurements. Manual methods

ISO 4269:2001
Petroleum and liquid petroleum products. Tank calibration by liquid measurement. Incremental method using volumetric meters

ISO 4287:2000
Geometrical product specification (GPS). Surface texture. Profile method. Terms, definitions and surface texture parameters

ISO 4288:1998
Geometric product specification (GPS). Surface texture. Profile method: Rules and procedures for the assessment of surface texture

ISO 4308-1:2003
Cranes and lifting appliances. Selection of wire ropes. General

ISO 4320:1998
Non-ionic surface active agents. Determination of cloud point index. Volumetric method

ISO 4375:2000
Hydrometric determinations. Cableway systems for stream gauging

ISO 4377:2002
Hydrometric determinations. Flow measurement in open channels using structures. Flat-V weirs

ISO 4381:2000
Plain bearings. Lead and tin casting alloys for multilayer plain bearings

ISO 4383:2000
Plain bearings. Multilayer materials for thin-walled plain bearings

ISO 4384-1:2000
Plain bearings. Hardness testing of bearing metals. Compound materials

ISO 4392-1:2002
Hydraulic fluid power. Determination of characteristics of motors. At constant low speed and constant pressure

ISO 4392-2:2002
Hydraulic fluid power. Determination of characteristics of motors. Startability

ISO 4401:1994
Hydraulic fluid power. Four-port directional control valves. Mounting surfaces

ISO 4404:1998
Petroleum and related products. Determination of the corrosion resistance of water-containing fire-resistant fluids for hydraulic systems

ISO 4404-1:2001
Petroleum and related products. Determination of the corrosion resistance of fire-resistant hydraulic fluids. Water-containing fluids

ISO 4404-2:2003
Petroleum and related products. Determination of the corrosion resistance fire-resistant hydraulic fluids. Non-aqueous fluids

ISO 4406:1999
Hydraulic fluid power. Fluids. Method for coding the level of contamination by solid particles

ISO 4407:2002
Hydraulic fluid power. Fluid contamination. Determination of particulate contamination by the counting method using an optical microscope

ISO 4413:1998
Hydraulic fluid power. General rules relating to systems

ISO 4414:1998
Pneumatic fluid power. General rules relating to systems

ISO 4433-1:1997
Thermoplastic pipes. Resistance to liquid chemicals. Classification. Immersion test method

ISO 4433-2:1997
Thermoplastics pipes. Resistance to liquid chemicals. Classification. Polyolefin pipes

ISO 4433-3:1997
Thermoplastic pipes. Resistance to liquid chemicals. Classification. Unplasticized poly(vinyl chloride) (PVC-U), high-impact poly(vinyl chloride) (PVC-HI) and chlorinated poly(vinyl chloride) (PVC-C) pipes

ISO 4433-4:1997
Thermoplastics pipes. Resistance to liquid chemicals. Classification. Poly(vinylidene fluoride) (PVDF) pipes

ISO 4490:2002
Metallic powders. Determination of flow time by means of a calibrated funnel (Hall flowmeter)

ISO 4491-2:1999
Metallic powders. Determination of oxygen content by reduction methods. Loss of mass on hydrogen reduction (hydrogen loss)

ISO 4507:2000
Sintered ferrous materials, carburized or carbonitrided. Determination and verification of case-hardening depth by a micro-hardness test

ISO 4512:2000
Petroleum and liquid petroleum products. Equipment for measurement of liquid levels in storage tanks. Manual methods

ISO 4516:2002
Metallic and other inorganic coatings. Vickers and Knoop microhardness tests

ISO 4518:1995
Metallic coatings. Measurement of coating thickness. Profilometric method

ISO 4524-2:2000
Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Mixed flowing gas (MFG) environmental tests

ISO 4524-3:1995
Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Electrographic tests for porosity

ISO 4524-6:1995
Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Determination of the presence of residual salts

ISO 4525:2003
Metallic coatings. Electroplated coatings of nickel plus chromium on plastics materials

ISO 4527:2003
Metallic coatings. Autocatalytic (electroless) nickel-phosphorus alloy coatings. Specification and test methods

ISO 4528:2000
Vitreous and porcelain enamel finishes. Selection of test methods for vitreous and porcelein enamelled areas of articles

ISO 4535:2000
Vitreous and porcelain enamels. Apparatus for determination of resistance to hot detergent solutions used for washing textiles

ISO 4536:1995
Metallic and non-organic coatings on metallic substrates. Saline droplets corrosion test (SD test)

ISO 4538:1995
Metallic coatings. Thioacetamide corrosion test (TAA test)

ISO 4541:1995
Metallic and other non-organic coatings. Corrodkote test (CORR test)

ISO 4543:1995
Metallic and other non-organic coatings. General rules for corrosion tests applicable for storage conditions

ISO 4566:1995
Small craft with inboard engine. Propeller shaft ends and bosses with 1:10 taper

ISO 4577:1999
Plastics. Polypropylene and propylene-copolymers. Determination of thermal oxidative stability in air. Oven method

ISO 4583:1998
Plastics. Epoxy resins and related materials. Determination of easily saponifiable chlorine

ISO 4587:2003
Adhesives. Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies

ISO 4589-1:2000
Plastics. Determination of burning behaviour by oxygen index. Guidance

ISO 4589-2:1999
Plastics. Determination of burning behaviour by oxygen index. Ambient-temperature test

ISO 4589-3:1996
Plastics. Determination of burning behaviour by oxygen index. Elevated temperature test

ISO 4590:2003
Rigid cellular plastics. Determination of the volume percentage of open cells and of closed cells

ISO 4597-1:1998
Plastics. Hardeners and accelerators for epoxide resins. Designation

ISO 4599:1997
Plastics. Determination of resistance to environmental stress cracking (ESC). Bent strip method

ISO 4600:1998
Plastics. Determination of environmental stress cracking (ESC). Ball or pin impression method

ISO 4602:1997
Reinforcements. Woven fabrics. Determination of number of yarns per unit length of warp and weft

ISO 4603:1993
Textile glass. Woven fabrics. Determination of thickness

ISO 4606:1995
Textile glass. Woven fabric. Determination of tensile breaking force and elongation at break by the strip method

ISO 4608:1998
Plastics. Homopolymer and copolymer resins of vinyl chloride for general use. Determination of plasticizer absorption at room temperature

ISO 4610:2001
Plastics. Vinyl chloride homopolymer and copolymer resins. Sieve analysis using air-jet sieve apparatus

ISO 4611:2001
Plastics. Determination of the effects of exposure to damp heat, water spray and salt mist

ISO 4612:1999
Plastics. Preparation of PVC pastes for test purposes. Planetary-mixer method

ISO 4613-1:1999
Plastics. Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials. Designation and specification

ISO 4613-2:1996
Plastics. Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials. Preparation of test specimens and determination of properties

ISO 4614:2000
Plastics. Melamine-formaldehyde mouldings. Determination of extractable formaldehyde

ISO 4615:1999
Plastics. Unsaturated polyesters and epoxide resins. Determination of total chlorine content

ISO 4617:2000
Paints and varnishes. List of equivalent terms

ISO 4618-2:2000
Paints and varnishes. Terms and definitions for coating materials. Special terms relating to paint characteristics and properties

ISO 4618-3:2000
Paints and varnishes. Terms and definitions for coating materials. Surface preparation and methods of application

ISO 4619:1998
Driers for paints and varnishes

ISO 4622:1995
Paints and varnishes. Pressure test for stackability

ISO 4623-1:2002
Paints and varnishes. Determination of resistance to filiform corrosion. Steel substrates

ISO 4624:2003
Paints and varnishes. Pull-off test for adhesion

ISO 4628-6:2001
Paints and varnishes. Evaluation of degradation of paint coatings. Designation of intensity, quantity and size of common types of defect. Rating of degree of chalking by tape method

ISO 4629:1998
Binders for paints and varnishes. Determination of hydroxyl value. Titrimetric method

ISO 4638:1995
Polymeric materials, cellular flexible. Determination of air flow permeability

ISO 4639-2:1995
Rubber tubing and hoses for fuel circuits for internal-combustion engines. Specification. Oxygenated fuels

ISO 4639-3:1995
Rubber tubing and hoses for fuel circuits for internal-combustion engines. Specification. Oxidized fuels

ISO 4649:2002
Rubber, vulcanized or thermoplastic. Determination of abrasion resistance using a rotating cylindrical drum device

ISO 4651:1995
Cellular rubbers and plastics. Determination of dynamic cushioning performance

ISO 4658:1999
Acrylonitrile-butadiene rubber (NBR). Evaluation procedure

ISO 4659:2003
Styrene-butadiene rubber (carbon black or carbon black and oil masterbatches). Evaluation procedure

ISO 4660:1999
Rubber, raw natural. Colour index test

ISO 4664:1998
Rubber. Guide to the determination of dynamic properties

ISO 4665:1998
Rubber, vulcanized and thermoplastic. Resistance to weathering

ISO 4671:2001
Rubber and plastics hoses and hose assemblies. Methods of measurement of dimensions

ISO 4672:1999
Rubber and plastics hoses. Sub-ambient temperature flexibility tests

ISO 4674-2:1998
Rubber- or plastics-coated fabrics. Determination of tear resistance. Ballistic pendulum method

ISO 4695:1995
Iron ores. Determination of reducibility

ISO 4698:1994
Iron ore pellets. Determination of relative free-swelling index

ISO 4703:2001
Test conditions for surface grinding machines with two columns. Machines for grinding slideways. Testing of the accuracy

ISO 4708:2000
Composition cork. Gasket material. Test methods

ISO 4709:2000
Composition cork. Gasket material. Classification system, requirements, sampling, packing and marking

ISO 4710:2000
Cork. Cylindrical stoppers for sparkling wines and gasified wines. Characteristics

ISO 4714:2000
Composition cork. Specifications, sampling, packaging and marking

ISO 4715:1978
Essential oils. Quantitative evaluation of residue on evaporation

ISO 4720:1992
Essential oils. Nomenclature

ISO 4753:2000
Fasteners. Ends of parts with external ISO metric screw thread

ISO 4757:1995
Cross recesses for screws

ISO 4759-1:2001
Tolerances for fasteners. Bolts, screws, studs and nuts. Product grades A, B and C

ISO 4759-3:2000
Tolerances for fasteners. Plain washers for bolts, screws and nuts. Product grades A and C

ISO 4762:1998
Hexagon socket head cap screws

ISO 4782:1987
Specification for metal wire for industrial wire screens and woven wire cloth

ISO 4795:1996
Laboratory glassware. Glass for thermometer bulbs

ISO 4796-1:2001
Laboratory glassware. Bottles. Screw-neck bottles

ISO 4796-2:2001
Laboratory glassware. Bottles. Conical neck bottles

ISO 4796-3:2001
Laboratory glassware. Bottles. Aspirator bottles

ISO 4798:1997
Laboratory glassware. Filter funnels

ISO 4800:1998
Laboratory glassware. Separating funnels and dropping funnels

ISO 4823:2001
Dentistry. Elastomeric impression materials

ISO 4824:1997
Dentistry. Ceramic denture teeth

ISO 4833:2003
Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of microorganisms. Colony-count technique at 30$0DC

ISO 4834:1997
Cinematography. Magnetic sound test films excluding striped release prints. Basic technical characteristics

ISO 4869-2:1995
Acoustics. Hearing protectors. Estimation of effective A-weighted sound pressure levels when hearing protectors are worn

ISO 4869-4:2000
Acoustics. Hearing protectors. Measurement of effective sound pressure levels for level-dependent sound-restoration ear muffs

ISO 4871:1997
Acoustics. Declaration and verification of noise emission values of machinery and equipment

ISO/IEC 4873:1991
Information technology. ISO 8-bit code for information interchange. Structure and rules for implementation

ISO 4880:1997
Burning behaviour of textiles and textile products. Vocabulary

ISO 4892-1:2001
Plastics. Methods of exposure to laboratory light sources. General guidance

ISO 4892-2:2000
Plastics. Methods of exposure to laboratory light sources. Xenon-arc sources

ISO 4892-3:2000
Plastics. Methods of exposure to laboratory light sources. Fluorescent UV lamps

ISO 4894-1:1999
Plastics. Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials. Designation system and basis for specifications

ISO 4894-2:1999
Plastics. Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials. Preparation of test specimens and determination of properties

ISO 4895:2000
Plastics. Liquid epoxy resins. Determination of tendency to crystallize

ISO 4902:1989
Information technology. Data communication. 37-pole DTE/DCE interface connector and contact number assignments

ISO 4903:1989
Information technology. Data communication. 15-pole DTE/DCE interface connector and contact number assignments

ISO 4909:2000
Bank cards. Magnetic stripe data content for track 3

ISO 4912:1981
Textiles. Cotton fibres. Evaluation of maturity. Microscopic method

ISO 4921:2002
Knitting. Basic concepts. Vocabulary

ISO 4957:2000
Tool steels

       SPONSORS

ISO 9000 Management Kit

iso 9000

An introductory presentation, a template for defining an ISO 9000 quality manual, an ISO 9000 2000 overview, ISO 9000 reference sheets, a workshop presentation, and documents to help understand process definition.


Space For Hire

Contact us if you wish to hire this space for your standards service or product.

The ISO Standards Glossary
Copyright © The International Standards Glossary, 2003.