ISO 1:2002
Geometrical Product Specifications (GPS). Standard reference temperature for geometrical product specification and verification
ISO 5-3:1995
Photography. Density measurements. Spectral conditions
ISO 5-4:1995
Photography. Density measurements. Geometric conditions for reflection density
ISO 6:1993
Photography. Black-and-white pictorial still camera negative film/process systems. Determination of ISO speed
ISO 15:1998
Rolling bearings. Radial bearings. Boundary dimensions, general plan
ISO 23:1993
Cinematography. Camera usage of 35 mm motion picture film. Specifications
ISO 25:1994
Cinematography. Camera usage of 16 mm motion picture film specification
ISO 26:1993
Cinematography. Projector usage of 16 mm motion-picture films for direct front projection. Specifications
ISO 29:1980
Cinematography. Projector usage of 8 mm Type R silent motion-picture film for direct front projection. Specifications
ISO 36:1999
Rubber, vulcanized or thermoplastic. Determination of adhesion to textile fabric
ISO 53:1998
Cylindrical gears for general and heavy engineering. Standard basic rack tooth profile
ISO 54:1996
Cylindrical gears for general engineering and for heavy engineering. Modules
ISO 60:2000
Plastics. Determination of apparent density of material that can be poured from a specified funnel
ISO 61:2000
Plastics. Determination of apparent density of moulding material that cannot be poured from a specified funnel
ISO 62:1999
Plastics. Determination of water absorption
ISO 68-1:1998
ISO general purpose screw threads. Basic profile. Metric screw threads
ISO 68-2:1998
ISO general purpose screw threads. Basic profile. Inch screw threads
ISO 69:1998
Cinematography. 16 mm motion-picture magnetic film. Cutting and perforating dimensions
ISO 70:1981
Cinematography. Monophonic 35 mm negative photographic sound record on 35 mm motion-picture film. Position and maximum width dimensions
ISO 75-1:1996
Plastics. Determination of temperature of deflection under load. General test method
ISO 75-2:1996
Plastics. Determination of temperature of deflection under load. Plastics and ebonite
ISO 75-3:1996
Plastics. Determination of temperature of deflection under load. High-strength thermosetting laminates and long-fibre-reinforced plastics
ISO 78-2:1999
Chemistry. Layout for standards. Methods of chemical analysis
ISO 90-1:1999
Light gauge metal containers. Definitions and determination of dimensions and capacities. Open-top cans
ISO 90-2:1999
Light gauge metal containers. Definitions and determination of dimensions and capacities. General use containers
ISO 90-3:2001
Light gauge metal containers. Definitions and determination of dimensions and capacities. Light gauge metal containers. Definitions and determination of dimensions and capacities. Aerosol cans
ISO 96-1:1992
Textile machinery and accessories. Rings and travellers for ring spinning and ring doubling frames. T-rings and their appropriate travellers
ISO 96-2:1992
Textile machinery and accessories. Rings and travellers for ring spinning and ring doubling frames. HZCH-, HZ- and J- rings and their appropriate travellers
ISO 98:2001
Textile machinery and accessories. Spinning preparatory and spinning machinery. Main dimensions of coverings for top rollers
ISO 104:2002
Rolling bearings. Thrust bearings. Boundary dimensions, general plan
ISO 105-A01:1996 Colour Scale
Textiles. Tests for colour fastness. Standard depths: matt
ISO 105-A01:1996
Textiles. Tests for colour fastness. General principles of testing
ISO 105-A04:1999
Textiles. Tests for colour fastness. Method for the instrumental assessment of the degree of staining of adjacent fabrics
ISO 105-A05:1997
Textiles. Tests for colour fastness. Instrumental assessment of change of colour for determination of grey scale rating
ISO 105-A06:1997
Textiles. Tests for colour fastness. Instrumental determination of 1/1 standard depth of colour
ISO 105-A08:2001
Textiles. Tests for colour fastness. Vocabulary used in colour measurement
ISO 105-B01:1999
Textiles. Tests for colour fastness. Colour fastness to light: Daylight
ISO 105-B02:1999
Textiles. Tests for colour fastness. Colour fastness to artificial light: Xenon arc fading lamp test
ISO 105-B03:1997
Textiles. Tests for colour fastness. Colour fastness to weathering. Outdoor exposure
ISO 105-B04:1997
Textiles. Tests for colour fastness. Colour fastness to artificial weathering. Xenon arc fading lamp test
ISO 105-B05:1996
Textiles. Tests for colour fastness. Detection and assessment of photochromism
ISO 105-B06:1998
Textiles. Tests for colour fastness. Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
ISO 105-B08:1999
Textiles. Tests for colour fastness. Quality control of blue wool reference materials 1 to 7
ISO 105-C06:1997
Textiles. Tests for colour fastness. Colour fastness to domestic and commercial laundering
ISO 105-C07:2001
Textiles. Tests for colour fastness. Colour fastness to wet scrubbing of pigment dyed or pigment printed textiles
ISO 105-C08:2002
Textiles. Tests for colour fastness. Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low temperature bleach activator
ISO 105-C09:2001
Textiles. Tests for colour fastness. Colour fastness to domestic and commercial laundering. Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator
ISO 105-D01:1995
Textiles. Tests for colour fastness. Colour fastness to dry cleaning
ISO 105-D02:1996
Textiles. Tests for colour fastness. Colour fastness to rubbing: Organic solvents
ISO 105-E01:1996
Textiles. Tests for colour fastness. Colour fastness to water
ISO 105-E02:1996
Textiles. Tests for colour fastness. Colour fastness to sea water
ISO 105-E03:1997
Textiles. Tests for colour fastness. Colour fastness to chlorinated water (swimming bath water)
ISO 105-E04:1996
Textiles. Tests for colour fastness. Colour fastness to perspiration
ISO 105-E05:1997
Textiles. Tests for colour fastness. Colour fastness to spotting. Acid
ISO 105-E06:1997
Textiles. Tests for colour fastness. Colour fastness to spotting. Alkali
ISO 105-E07:1997
Textiles. Tests for colour fastness. Colour fastness to spotting. Water
ISO 105-E08:1997
Textiles. Tests for colour fastness. Colour fastness to hot water
ISO 105-E09:1997
Textiles. Tests for colour fastness. Colour fastness to potting
ISO 105-E10:1997
Textiles. Tests for colour fastness. Colour fastness to decatizing
ISO 105-E11:1997
Textiles. Tests for colour fastness. Colour fastness to steaming
ISO 105-E12:1997
Textiles. Tests for colour fastness. Colour fastness to milling. Alkaline milling
ISO 105-E13:1997
Textiles. Tests for colour fastness. Colour fastness to acid-felting. Severe
ISO 105-E14:1997
Textiles. Tests for colour fastness. Colour fastness to acid-felting. Mild
ISO 105-F03:2001
Textiles. Tests for colour fastness. Specification for polyamide adjacent fabric
ISO 105-F04:2001
Textiles. Tests for colour fastness. Specification for polyester adjacent fabric
ISO 105-F05:2001
Textiles. Tests for colour fastness. Specification for acrylic adjacent fabric
ISO 105-F06:2000
Textiles. Tests for colour fastness. Specification for silk adjacent fabric
ISO 105-F07:2001
Textiles. Tests for colour fastness. Specification for secondary acetate adjacent fabric
ISO 105-G01:1996
Textiles. Tests for colour fastness. Colour fastness to nitrogen oxides
ISO 105-G02:1997
Textiles. Tests for colour fastness. Colour fastness to burnt-gas fumes
ISO 105-G03:1997
Textiles. Tests for colour fastness. Colour fastness to ozone in the atmosphere
ISO 105-J01:2000
Textiles. Tests for colour fastness. General principles for measurement of surface colour
ISO 105-J02:2000
Textiles. Tests for colour fastness. Instrumental assessment of relative whiteness
ISO 105-J03:1997
Textiles. Tests for colour fastness. Calculation of colour differences
ISO 105-N02:1995
Textiles. Tests for colour fastness. Colour fastness to bleaching: Peroxide
ISO 105-N03:1995
Textiles. Tests for colour fastness. Colour fastness to bleaching: Sodium chlorite (mild)
ISO 105-N04:1995
Textiles. Tests for colour fastness. Colour fastness to bleaching: Sodium chlorite (severe)
ISO 105-N05:1995
Textiles. Tests for colour fastness. Colour fastness to stoving
ISO 105-P01:1995
Textiles. Tests for colour fastness. Colour fastness to dry heat (excluding pressing)
ISO 105-P02:1996
Textiles. Tests for colour fastness. Colour fastness to pleating. Steam pleating
ISO 105-S01:1996
Textiles. Tests for colour fastness. Colour fastness to vulcanization. Hot air
ISO 105-S02:1996
Textiles. Tests for colour fastness. Colour fastness to vulcanization: Sulfur monochloride
ISO 105-S03:1996
Textiles. Tests for colour fastness. Colour fastness to vulcanization. Open steam
ISO 105-X01:1996
Textiles. Tests for colour fastness. Colour fastness to carbonizing: Aluminium chloride
ISO 105-X02:1996
Textiles. Tests for colour fastness. Colour fastness to carbonizing: Sulfuric acid
ISO 105-X04:1997
Textiles. Tests for colour fastness. Colour fastness to mercerizing
ISO 105-X05:1997
Textiles. Tests for colour fastness. Colour fastness to organic solvents
ISO 105-X06:1997
Textiles. Tests for colour fastness. Colour fastness to soda boiling
ISO 105-X07:1997
Textiles. Tests for colour fastness. Colour fastness to cross-dyeing. Wool
ISO 105-X08:1997
Textiles. Tests for colour fastness. Colours fastness to degumming
ISO 105-X09:1996
Textiles. Tests for colour fastness. Colour fastness to formaldehyde
ISO 105-X10:1996
Textiles. Tests for colour fastness. Assessment of migration of textile colours into polyvinyl chloride coatings
ISO 105-X11:1996
Textiles. Tests for colour fastness. Colour fastness to hot pressing
ISO 105-X12:2002
Textiles. Tests for colour fastness. Colour fastness to rubbing
ISO 105-X13:1997
Textiles. Tests for colour fastness. Colour fastness of wool dyes to processes using chemical means for creasing, pleating and setting
ISO 105-X14:1997
Textiles. Tests for colour fastness. Colour fastness to acid chlorination of wool. Sodium dichloroisocyanurate
ISO 105-X16:2001
Textiles. Tests for colour fastness. Colour fastness to rubbing. Small areas
ISO 105-Z01:1996
Textiles. Tests for colour fastness. Colour fastness to metals in the dye-bath: chromium salts
ISO 105-Z02:1996
Textiles. Tests for colour fastness. Colour fastness to metals in the dye-bath. Iron and copper
ISO 105-Z03:1998
Textiles. Tests for colour fastness. Intercompatibility of basic dyes for acrylic fibres
ISO 105-Z04:1998
Textiles. Tests for colour fastness. Dispersibility of disperse dyes
ISO 105-Z05:1998
Textiles. Tests for colour fastness. Determination of the dusting behaviour of dyes
ISO 105-Z06:2000
Textiles. Tests for colour fastness. Evaluation of dye and pigment migration
ISO 105-Z07:1998
Textiles. Tests for colour fastness. Determination of application solubility and solution stability of water-soluble dyes
ISO 105-Z08:1998
Textiles. Tests for colour fastness. Determination of solubility and solution stability of reactive dyes in the presence of electrolytes
ISO 105-Z09:1998
Textiles. Tests for colour fastness. Determination of cold water solubility of water-soluble dyes
ISO 105-Z10:1999
Textiles. Tests for colour fastness. Determination of relative colour strength of dyes in solution
ISO 105-Z11:2001
Textiles. Tests for colour fastness. Evaluation of speckiness of colorant dispersions
ISO 113:1999
Rolling bearings. Plummer block housings. Boundary dimensions
ISO 119:1998
Plastics. Phenol-formaldehyde mouldings. Determination of free phenols. Iodometric method
ISO 120:1998
Plastics. Phenol-formaldehyde mouldings. Determination of free ammonia and ammonium compounds. Colorimetric comparison method
ISO 123:2001
Rubber latex. Sampling
ISO 128:1982
Technical drawings. General principles of presentation
ISO 128-20:2001
Technical drawings. General principles of presentation. Basic conventions for lines
ISO 128-21:2001
Technical drawings. General principles of presentation. Preparation of lines by CAD systems
ISO 128-22:1999
Technical drawings. General principles of presentation. Basic conventions and applications for leader lines and reference lines
ISO 128-23:1999
Technical drawings. General principles of presentation. Lines on construction drawings
ISO 128-24:1999
Technical drawings. General principles of presentation. Lines on mechanical engineering drawings
ISO 128-25:1999
Technical drawings. General principles of presentation. Lines on shipbuilding drawings
ISO 128-30:2001
Technical drawings. General principles of presentation. Basic conventions for views
ISO 128-34:2001
Technical drawings. General principles of presentation. Views on mechanical engineering drawings
ISO 128-40:2001
Technical drawings. General principles of presentation. Basic conventions for cuts and sections
ISO 128-44:2001
Technical drawings. General principles of presentation. Sections on mechanical engineering drawings
ISO 128-50:2001
Technical drawings. General principles of presentation. Basic conventions for representing areas on cuts and sections
ISO 129:1985
Technical drawings. Dimensioning. General principles, definitions, methods of execution and special indications
ISO 132:1999
Rubber, vulcanized or thermoplastic. Determination of flex cracking and crack growth (De Mattia)
ISO 140-1:1998
Acoustics. Measurement of sound insulation in buildings and of building elements. Requirements for laboratory test facilities with suppressed flanking transmission
ISO 140-3:1995
Acoustics. Measurement of sound insulation in buildings and of building elements. Laboratory measurement of airborne sound insulation of building elements
ISO 140-4:1998
Acoustics. Measurement of sound insulation in buildings and of building elements. Field measurements of airborne sound insulation between rooms
ISO 140-5:1998
Acoustics. Measurement of sound insulation in buildings and of building elements. Field measurements of airborne sound insulation of facade elements and facades
ISO 140-6:1998
Acoustics. Measurement of sound insulation in buildings and of building elements. Laboratory measurements of impact sound insulation of floors
ISO 140-7:1998
Acoustics. Measurement of sound insulation in buildings and of building elements. Field measurements of impact sound insulation of floors
ISO 140-8:1998
Acoustics. Measurement of sound insulation in buildings and of building elements. Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor
ISO 140-12:2000
Acoustics. Measurement of sound insulation in buildings and of building elements. Laboratory measurement of room-to-room airborne and impact sound insulation of an access floor
ISO 155:1998
Belt drives. Pulleys. Limiting values for adjustment of centres
ISO 172:1998
Plastics. Phenol-formaldehyde mouldings. Detection of free ammonia
ISO 175:2001
Plastics. Methods of test for the determination of the effects of immersion in liquid chemicals
ISO 176:2000
Plastics. Determination of loss of plasticizers. Activated carbon method
ISO 177:2000
Plastics. Determination of migration of plasticizers
ISO 178:2003
Plastics. Determination of flexural properties
ISO 179:1997
Plastics. Determination of Charpy impact strength
ISO 179-1:2001
Plastics. Determination of Charpy impact properties. Non-instrumented impact test
ISO 179-2:1999
Plastics. Determination of Charpy impact properties. Instrumented impact test
ISO 180:2001
Plastics. Determination of Izod impact strength
ISO 182-2:2000
Plastics. Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures. pH method
ISO 182-3:2000
Plastics. Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures. Conductometric method
ISO 182-3:2001
Plastics. Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures. Conductometric method
ISO 182-4:2000
Plastics. Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures. Potentiometric method
ISO 183:2000
Plastics. Qualitative evaluation of the bleeding of colorants
ISO 186:2002
Paper and board. Sampling to determine average quality
ISO 188:1998
Rubber, vulcanized or thermoplastic. Accelerated ageing and heat resistance tests
ISO 196:1995
Wrought copper and copper alloys. Detection of residual stress. Mercury(I) nitrate test
ISO 199:1997
Rolling bearings. Thrust bearings. Tolerances
ISO 212:1973
Essential oils. Sampling
ISO 216:2001
Writing paper and certain classes of printed matter. Trimmed sizes. A and B series
ISO 226:2003
Acoustics. Normal equal-loudness-level contours
ISO 228-1:2003
Pipe threads where pressure-tight joints are not made on the threads. Dimensions, tolerances and designation
ISO 228-2:2003
Pipe threads where pressure-tight joints are not made on the threads. Verification by means of limit gauges
ISO 230-1:1996
Test code for machine tools. Geometric accuracy of machines operating under no-load or finishing conditions
ISO 230-2:1997
Test code for machine tools. Determination of accuracy and repeatability of positioning of numerically controlled machine tool axes
ISO 230-3:2001
Test code for machine tools. Determination of thermal effects
ISO 230-4:1996
Test code for machine tools. Circular tests for numerically controlled machine tools
ISO 230-5:2000
Test code for machine tools. Determination of the noise emission
ISO 230-6:2002
Test code for machine tools. Determination of positioning accuracy on body and face diagonals (Diagonal displacement tests)
ISO 246:1995
Rolling bearings. Cylindrical roller bearings, separate thrust collars. Boundary dimensions
ISO 251:2003
Conveyor belts with textile carcass. Widths and lengths
ISO 252-1:1999
Textile conveyor belts. Adhesive strength between constitutive elements. Methods of test
ISO 254:1998
Belt drives. Pulleys. Quality, finish and balance
ISO 261:1998
ISO general purpose metric screw threads. General plan
ISO 262:1998
ISO general purpose metric screw threads. Selected sizes for screws, bolts and nuts
ISO 266:1997
Acoustics. Preferred frequencies
ISO 276:2002
Binders for paints and varnishes. Linseed stand oil. Requirements and methods of test
ISO 277:2002
Binders for paints and varnishes. Raw tung oil. Requirements and methods of test
ISO 279:1998
Essential oils. Determination of relative density at 20$0DC. Reference method
ISO 280:1998
Essential oils. Determination of refractive index
ISO 283-1:2000
Textile conveyor belts. Full thickness tensile testing. Determination of tensile strength, elongation at break and elongation at the reference load
ISO 284:2003
Conveyor belts. Electrical conductivity. Specification and test method
ISO 291:1997
Plastics. Standard atmospheres for conditioning and testing
ISO 293:2003
Plastics. Compression moulding test specimens of thermoplastic materials
ISO 294-1:1998
Plastics. Injection moulding of test specimens of thermoplastic materials. General principles, and moulding of multipurpose and bar test specimens
ISO 294-2:1998
Plastics. Injection moulding of test specimens of thermoplastic materials. Small tensile bars
ISO 294-3:2003
Plastics. Injection moulding of test specimens of thermoplastic materials. Small plates
ISO 294-4:2003
Plastics. Injection moulding of test specimens of thermoplastic materials. Determination of moulding shrinkage
ISO 295:1999
Plastics. Compression moulding of test specimens of thermosetting materials
ISO 305:1999
Plastics. Determination of thermal stability of poly (vinyl chloride) related chlorine-containing homopolymers and copolymers and their compounds. Discoloration method
ISO 306:1997
Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST)
ISO 307:2003
Plastics. Polyamides. Determination of viscosity number
ISO 308:1998
Plastics. Phenolic moulding materials. Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state)
ISO 354:2003
Acoustics. Measurement of sound absorption in a reverberation room
ISO 356:1996
Essential oils. Preparation of test samples
ISO 359:1983
Cinematography. Projectable image area on 16 mm motion-picture prints. Dimensions and location
ISO 362:1998
Acoustics. Measurement of noise emitted by accelerating road vehicles. Engineering method
ISO 363:1992
Textile machinery and accessories. Flat steel healds with closed end loops. Dimensions
ISO 366-4:1992
Textile machinery and accessories. Reeds. Plastic bound metal reeds. Dimensions and designation
ISO 368:1991
Spinning preparatory, spinning and doubling (twisting) machinery. Tubes for ring-spinning, doubling and twisting spindles, taper 1:38 and 1:64
ISO 376:2002
Metallic materials. Calibration of force-proving instruments used for the verification of uniaxial testing machines
ISO 377:1997
Steel and steel products. Location and preparation of samples and test pieces for mechanical testing
ISO 389-1:2000
Acoustics. Reference zero for the calibration of audiometric equipment. Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones
ISO 389-2:1997
Acoustics. Reference zero for the calibration of audiometric equipment. Reference equivalent threshold sound pressure levels for pure tones and insert earphones
ISO 389-3:1999
Acoustics. Reference zero for the calibration of audiometric equipment. Reference equivalent threshold force levels for pure tones and bone vibrators
ISO 389-4:1999
Acoustics. Reference zero for the calibration of audiometric equipment. Reference levels for narrow-band masking noise
ISO 389-5:2001
Acoustics. Reference zero for the calibration of audiometric equipment. Reference equivalent threshold sound pressure levels for pure tones in the frequency range 8 kHz to 16 kHz
ISO 389-7:1998
Acoustics. Reference zero for the calibration of audiometric equipment. Reference threshold of hearing under free-field and diffuse-field listening conditions
ISO 406:1987
Technical drawings. Tolerancing of linear and angular dimensions
ISO 418:2001
Photography. Processing chemicals. Specifications for anhydrous sodium sulfite
ISO 420:1994
Photography. Processing chemicals. Specifications for potassium bromide
ISO 422:1994
Photography. Processing chemicals. Specifications for p-methylaminophenol sulfate
ISO 423:1994
Photography. Processing chemicals. Specification for hydroquinone
ISO 424:1994
Photography. Processing chemicals. Specification for anhydrous sodium carbonate and sodium carbonate monohydrate
ISO 445:1999
Pallets for materials handling. Vocabulary
ISO 449:2000
Ships and marine technology. Magnetic compasses, binnacles and azimuth reading devices. Class A
ISO 464:1995
Rolling bearings. Radial bearings with locating snap ring. Dimensions and tolerances
ISO 472:2001
Plastics. Vocabulary
ISO 483:1999
Plastics. Small enclosures for conditioning and testing using aqueous solutions to maintain relative humidity at constant value
ISO 486:1988
Cinematography. 16 mm motion-picture film perforated 8 mm Type R. Cutting and perforating dimensions
ISO 487:1998
Steel roller chains, types S and C, attachments and sprockets
ISO 489:1999
Plastics. Determination of refractive index
ISO 490:1993
Cinematography. Magnetic stripes and magnetic recording head gaps for sound record on 16 mm motion-picture film perforated along one edge (Type 1). Positions and width dimensions
ISO 491:2002
Cinematography. 35 mm motion-picture film and magnetic film. Cutting and perforating dimensions
ISO 492:2002
Rolling bearings. Radial bearings. Tolerances
ISO 505:2000
Conveyor belts. Method for the determination of the tear propagation resistance of textile conveyor belts
ISO 509:1996
Pallet trucks. Principal dimensions
ISO 516:1999
Photography. Camera shutters. Timing
ISO 525:1999
Bonded abrasive products. General requirements
ISO 527-1:1996
Plastics. Determination of tensile properties. General principles
ISO 527-2:1996
Plastics. Determination of tensile properties. Test conditions for moulding and extrusion plastics
ISO 527-3:1996
Plastics. Determination of tensile properties. Test conditions for films and sheets
ISO 527-4:1997
Plastics. Determination of tensile properties. Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
ISO 527-5:1997
Plastics. Determination of tensile properties. Test conditions for unidirectional fibre-reinforced plastic composites
ISO 536:1997
Paper and board. Determination of grammage
ISO 542:1995
Oilseeds. Sampling
ISO 582:1995
Rolling bearings. Chamfer dimensions. Maximum values
ISO 583-1:2000
Conveyor belts with a textile carcass. Total thickness and thickness of elements. Methods of test
ISO 584:1998
Plastics. Unsaturated polyester resins. Determination of reactivity at 80 $0DC (conventional method)
ISO 585:1999
Plastics. Unplasticized cellulose acetate. Determination of moisture content
ISO 591-1:2000
Titanium dioxide pigments for paints. Specifications and methods of test
ISO 592:1998
Essential oils. Determination of optical rotation
ISO 595-2:1995
Reusable all-glass or metal-and-glass syringes for medical use. Design, performance requirements and tests
ISO 603-1:1999
Bonded abrasive products. Dimensions. Grinding wheels for external cylindrical grinding between centres
ISO 603-2:1999
Bonded abrasive products. Dimensions. Grinding wheels for centreless external cylindrical grinding
ISO 603-3:1999
Bonded abrasive products. Dimensions. Grinding wheels for internal cylindrical grinding
ISO 603-4:1999
Bonded abrasive products. Dimensions. Grinding wheels for surface grinding/peripheral grinding
ISO 603-5:1999
Bonded abrasive products. Dimensions. Grinding wheels for surface grinding/face grinding
ISO 603-6:1999
Bonded abrasive products. Dimensions. Grinding wheels for tool and toolroom grinding
ISO 603-7:1999
Bonded abrasive products. Dimensions. Grinding wheels for manually guided grinding
ISO 603-8:1999
Bonded abrasive products. Dimensions. Grinding wheels for deburring and fettling/snagging
ISO 603-9:1999
Bonded abrasive products. Dimensions. Grinding wheels for high pressure grinding
ISO 603-10:1999
Bonded abrasive products. Dimensions. Stones for honing and superfinishing
ISO 603-11:1999
Bonded abrasive products. Dimensions. Hand finishing sticks
ISO 603-12:1999
Bonded abrasive products. Dimensions. Grinding wheels for deburring and fettling on a straight grinder
ISO 603-13:1999
Bonded abrasive products. Dimensions. Grinding wheels for deburring and fettling on a vertical grinder
ISO 603-14:1999
Bonded abrasive products. Dimensions. Grinding wheels for deburring and fettling/snagging on an angle grinder
ISO 603-15:1999
Bonded abrasive products. Dimensions. Grinding wheels for cutting-off on stationary or mobile cutting-off machines
ISO 603-16:1999
Bonded abrasive products. Dimensions. Grinding wheels for cutting-off on hand-held power tools
ISO 604:2003
Plastics. Determination of compressive properties
ISO 611:2003
Road vehicles. Braking of automotive vehicles and their trailers. Vocabulary
ISO 613:2001
Ships and marine technology. Magnetic compasses, binnacles and azimuth reading devices. Class B
ISO 639-1:2002
Codes for the representation of the names of languages. Alpha-2 code
ISO 639-2:1998
Codes for the representation of the names of languages. Alpha-3 code
ISO 642:1999
Steel hardenability test by end quenching (Jominy test)
ISO 643:2003
Steels. Micrographic determination of the apparent grain size
ISO/IEC 646:1991
Information technology. ISO 7-bit coded character set for information interchange
ISO 658:2002
Oilseeds. Determination of content of impurities
ISO 659:1999
Oilseeds. Determination of oil content (Reference method)
ISO 660:2000
Animal and vegetable fats and oils. Determination of acid value and acidity
ISO 661:1995
Animal and vegetable fats and oils. Preparation of test sample
ISO 662:2001
Animal and vegetable fats and oils. Determination of moisture and volatile matter content
ISO 663:2001
Animal and vegetable fats and oils. Determination of insoluble impurities content
ISO 664:1995
Oilseeds. Reduction of laboratory sample to test sample
ISO 665:2000
Oilseeds. Determination of moisture and volatile matter content
ISO 666:1996
Machine tools. Mounting of plain grinding wheels by means of hub flanges
ISO 668:1995
Series 1 freight containers. Classification, dimensions and ratings
ISO 683-17:1999
Heat-treated steels, alloy steels and free-cutting steels. Ball and roller bearing steels
ISO 690-2:1997
Information and documentation. Bibliographic references. Electronic documents or parts thereof
ISO 694:2001
Ships and marine technology. Positioning of magnetic compasses in ships
ISO 701:1998
International gear notation. Symbols for geometrical data
ISO 703-1:2000
Conveyor belts. Transverse flexibility and troughability. Test method
ISO 704:2000
Terminology work. Principles and methods
ISO 707:1997
Milk and milk products. Guidance on sampling
DD ISO 709:1980
Essential oils. Determination of ester value
ISO 709:2001
Essential oils. Determination of ester value
ISO 717-1:1997
Acoustics. Rating of sound insulation in buildings and of building elements. Airborne sound insulation
ISO 717-2:1997
Acoustics. Rating of sound insulation in buildings and of building elements. Impact sound insulation
ISO 727-1:2002
Fittings made from unplasticized poly (vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure. Metric series
ISO 727-2:2002
Fittings made from unplasticized poly (vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure. Inch-based series
ISO 732:2000
Photography. 120-size and 220-size films. Dimensions
ISO 734-1:2001
Oilseed residues. Determination of oil content. Extraction method with hexane (or light petroleum)
ISO 734-2:2001
Oilseed residues. Determination of oil content. Rapid extraction method
ISO 748:2000
Measurement of liquid flow in open channels. Velocity-area methods
ISO 764:2002
Horology. Magnetic resistant watches
ISO 772:2001
Hydrometric determinations. Vocabulary and symbols
ISO 777:2001
Paper, board and pulp. Determination of calcium
ISO 778:2001
Paper, board and pulp. Determination of copper
ISO 779:2001
Paper, board and pulp. Determination of iron
ISO 780:1999
Packaging. Pictorial marking for handling of goods
ISO 787-2:1995
General methods of test for pigments and extenders. Determination of matter volatile at 105$0DC
ISO 787-3:2001
General methods of test for pigments and extenders. Determination of matter soluble in water. Hot extraction method
ISO 787-5:1995
General methods of test for pigments and extenders. Determination of oil absorption value
ISO 787-8:2001
General methods of test for pigments and extenders. Determination of matter soluble in water. Cold extraction method
ISO 787-9:1995
General methods of test for pigments and extenders. Determination of pH value of aqueous suspension
ISO 787-10:1995
General methods of test for pigments and extenders. Determination of density. Pyknometer method
ISO 787-11:1995
General methods of test for pigments and extenders. Determination of tamped volume and apparent density after tamping
ISO 787-13:2002
General methods of test for pigments and extenders. Determination of water-soluble sulfates, chlorides and nitrates
ISO 787-14:2002
General methods of test for pigments and extenders. Determination of resistivity of aqueous extract
ISO 787-15:1995
General methods of test for pigments and extenders. Comparison of resistance to light of coloured pigments of similar types
ISO 787-16:1995
General methods of test for pigments and extenders. Determination of relative tinting strength (or equivalent colouring value) and colour on reduction of coloured pigments. Visual comparison method
ISO 787-17:2002
General methods of test for pigments and extenders. Comparison of lightening power of white pigments
ISO 787-18:1995
General methods of test for pigments and extenders. Determination of residue on sieve. Mechanical flushing procedure
ISO 787-19:1995
General methods of test for pigments and extenders. Determination of water-soluble nitrates (Salicylic acid method)
ISO 787-23:1995
General methods of test for pigments and extenders. Determination of density (using a centrifuge to remove entrained air)
ISO 787-24:1995
General methods of test for pigments and extenders. Determination of relative tinting strength of coloured pigments and relative scattering power of white pigments. Photometric methods
ISO 801-1:1997
Pulps. Determination of saleable mass in lots. Pulp baled in sheet form
ISO 801-3:1997
Pulps. Determination of saleable mass in lots. Unitized bales
ISO 830:1999
Freight containers. Vocabulary
ISO 832:1994
Information and documentation. Bibliographic description and references. Rules for the abbreviation of bibliographic terms
ISO 844:2001
Cellular plastics. Compression test for rigid materials. Specification
ISO 845:1995
Cellular plastics and rubbers. Determination of apparent (bulk) density
ISO 846:1997
Plastics. Evaluation of the action of microorganisms
ISO 862:1995
Glossary of terms for surface active agents
ISO 868:2003
Plastics and ebonite. Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 871:1996
Plastics. Determination of ignition temperature using a hot-air furnace
ISO 875:1999
Essential oils. Evaluation of miscibility in ethanol
ISO 877:1997
Plastics. Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors.
ISO 885:2000
General purpose bolts and screws. Metric series. Radii under the head
ISO 887:2000
Plain washers for metric bolts, screws and nuts for general purposes. General plan
ISO 897:2000
Photography. Roll films, 126, 110 and 135- size films. Identification of the image-bearing side
ISO 898-1:1999
Mechanical properties of fasteners made of carbon steel and alloy steel. Bolts, screws and studs
ISO 898-5:1999
Mechanical properties of fasteners made of carbon steel and alloy steel. Set screws and similar threaded fasteners not under tensile stresses
ISO 898-6:1996
Mechanical properties of fasteners. Nuts with specified proof load values. Fine pitch thread
ISO 899-1:2003
Plastics. Determination of creep behaviour. Tensile creep
ISO 899-2:2003
Plastics. Determination of creep behaviour. Flexural creep by three-point loading
ISO 923:2000
Coal cleaning equipment. Performance evaluation
ISO 945:1994
Cast iron. Designation of microstructure of graphite
ISO 960:1998
Plastics. Polyamides (PA). Determination of water content
ISO 965-1:1998
ISO general purpose metric screw threads. Tolerances. Principles and basic data
ISO 965-2:1998
ISO general purpose metric screw threads. Tolerances. Limits of sizes for general purpose external and internal screw threads. Medium quality
ISO 965-3:1998
ISO general purpose metric screw threads. Tolerances. Deviations for constructional screw threads
ISO 965-4:1998
ISO general purpose metric screw threads. Tolerances. Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
ISO 965-5:1998
ISO general purpose metric screw threads. Tolerances. Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
ISO 974:2000
Plastics. Determination of the brittleness temperature by impact
ISO 999:1996
Information and documentation. Guidelines for the content, organization and presentation of indexes
ISO 1007:2000
Photography. 135-size film and magazine. Specifications
ISO 1008:1992
Photography. Paper dimensions. Pictorial sheets
ISO 1009:2000
Photography. Paper dimensions. Rolls for printers
ISO 1012:1998
Photography. Films in sheets and rolls for general use. Dimensions
ISO 1039:1995
Cinematography. Cores for motion-picture and magnetic film rolls. Dimensions
ISO 1041:1973
Essential oils. Determination of freezing point
ISO 1042:2000
Laboratory glassware. One-mark volumetric flasks
ISO 1043-1:2002
Plastics. Symbols and abbreviated terms. Basic polymers and their special characteristics
ISO 1043-2:2001
Fillers and reinforcing materials
ISO 1043-3:1999
Plastics. Symbols and abbreviated terms. Plasticizers
ISO 1043-4:1999
Plastics. Symbols and abbreviated terms. Flame retardants
ISO 1048:1991
Photography. Exposed roll films. Identification
ISO 1051:1999
Rivet shank diameters
ISO 1060-1:1999
Plastics. Homopolymer and copolymer resins of vinyl chloride. Designation system and basis for specifications
ISO 1060-2:1999
Plastics. Homopolymer and copolymer resins of vinyl chloride. Preparation of test samples and determination of properties
ISO 1061:1999
Plastics. Unplasticized cellulose acetate. Determination of free acidity
ISO 1071:2003
Welding consumables. Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron. Classification
ISO 1085:1999
Assembly tools for screws and nuts. Double-ended wrenches. Size pairing
ISO 1087-1:2000
Terminology work. Vocabulary. Theory and application
ISO 1087-2:2000
Terminology work. Vocabulary. Computer applications
ISO 1100-2:1998
Measurement of liquid flow in open channels. Determination of the stage-discharge relation
ISO 1101:1983
Technical drawings. Geometrical tolerancing. Tolerancing of form, orientation, location and run-out. Generalities, definitions, symbols, indications on drawings
ISO 1107:2003
Fishing nets. Netting. Basic terms and definitions
ISO 1110:1998
Plastics. Polyamides. Accelerated conditioning of test specimens
ISO 1112:1999
Horology. Functional and non-functional jewels
ISO 1116:1999
Micrographics. 16 mm and 35 mm microfilm spools and reels. Specifications
ISO 1120:2002
Conveyor belts. Determination of strength of mechanical fastenings. Static test method
ISO 1122-1:1998
Vocabulary of gear terms. Definitions related to geometry
ISO 1127:1997
Stainless steel tubes. Dimensions, tolerances and conventional masses per unit length
ISO 1132-1:2000
Rolling bearings. Tolerances. Terms and definitions
ISO 1132-2:2001
Rolling bearings. Tolerances. Measuring and gauging principles and methods
ISO 1133:2000
Plastics. Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
ISO 1157:2000
Plastics. Cellulose acetate in dilute solution. Determination of viscosity number and viscosity ratio
ISO 1158:1998
Plastics. Vinyl chloride homopolymers and copolymers. Determination of chlorine content
ISO 1163-1:2000
Plastics. Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials. Designation system and basis for specifications
ISO 1163-2:2000
Plastics. Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials. Preparation of test specimens and determination of properties
ISO 1172:1999
Textile-glass-reinforced plastics. Prepregs, moulding compounds and laminates. Determination of the textile-glass and mineral-filler content. Calcination methods
ISO 1173:2001
Assembly tools for screws and nuts. Drive ends for hand and machine-operated screwdriver bits and connecting parts. Dimensions, torque testing
ISO 1182:2002
Reaction to fire tests for building products. Non-combustibility test
ISO 1183-3:1999
Plastics. Methods for determining the density of non-cellular plastics. Gas pyknometer method
ISO 1189:1986
Cinematography. Recorded characteristic for magnetic sound records on 35 mm motion-picture film excluding striped release prints. Specifications
ISO 1202:1981
Essential oils. Determination of 1,8-cineole content
ISO 1203:1998
Photography. Roll film cameras. Back window location
ISO 1206:2001
Rolling bearings. Needle roller bearings, dimension series 48, 49 and 69. Boundary dimensions and tolerances
ISO 1207:1994
Slotted cheese head screws. Product grade A
ISO 1211:2001
Milk. Determination of fat content. Gravimetric method (Reference method)
ISO 1217:1996
Displacement compressors. Acceptance tests
ISO 1219-2:1995
Fluid power systems and components. Graphic symbols and circuit diagrams. Circuit diagrams
ISO 1222:2003
Photography. Tripod connections
ISO 1223:2003
Cinematography. Picture areas for motion-picture films for television. Position and dimensions
ISO 1230:1992
Photography. Determination of flash guide numbers
ISO 1234:1998
Split pins
ISO 1241:1996
Essential oils. Determination of ester values, before and after acetylation, and evaluation of the contents of free and total alcohols
ISO 1242:1999
Essential oils. Determination of acid value
ISO 1264:1997
Plastics. Homopolymer and copolymer resins of vinyl chloride. Determination of pH of aqueous extract
ISO 1265:1997
Plastics. Polyvinyl chloride resins. Determination of number of impurities and foreign particles
ISO 1268-1:2001
Fibre-reinforced plastics. Methods of producing test plates. General conditions
ISO 1268-2:2001
Fibre-reinforced plastics. Methods of producing test plates. Contact and spray-up moulding
ISO 1268-3:2000
Fibre-reinforced plastics. Methods of producing test plates. Wet compression moulding
ISO 1268-5:2001
Fibre-reinforced plastics. Methods of producing test plates. Filament winding
ISO 1268-6:2002
Fibre-reinforced plastics. Methods of producing test plates. Pultrusion moulding
ISO 1268-7:2001
Fibre-reinforced plastics. Methods of producing test plates. Resin transfer moulding
ISO 1268-9:2003
Fibre-reinforced plastics. Methods of producing test plates. Moulding of GMT/STC
ISO 1271:1983
Essential oils. Determination of carbonyl value. Free hydroxylamine method
ISO 1272:2000
Essential oils. Determination of content of phenols
ISO 1275:1995
Double-pitch precision roller chains and sprockets for transmission and conveyors
ISO 1279:1996
Essential oils. Determination of carbonyl value. Potentiometric methods using hydroxylammonium chloride
ISO 1302:2002
Geometrical product specifications (GPS). Indication of surface texture in technical product documentation
ISO 1307:1996
Rubber and plastics hoses for general-purpose industrial applications. Bore diameters and tolerances, and tolerances on length
ISO 1361:1997
Light-gauge metal containers. Round open-top cans. Internal diameters
ISO 1382:2002
Rubber. Vocabulary
ISO 1401:2000
Rubber hoses for agricultural spraying
ISO 1402:1997
Rubber and plastics hoses and hose assemblies. Hydrostatic testing
ISO 1403:1997
Rubber hoses, textile-reinforced, for general-purpose water applications. Specification
ISO 1421:1998
Rubber-or plastics-coated fabrics. Determination of tensile strength and elongation at break
ISO 1431-3:2000
Rubber, vulcanized or thermoplastic. Resistance to ozone cracking. Reference and alternative methods for determining the ozone concentration in laboratory test chambers
ISO 1434:1995
Natural rubber in bales. Amount of bale coating. Determination
ISO 1456:2003
Metallic coatings. Electrodeposited coatings of nickel plus chromium and of copper plus nickel plus chromium
ISO 1460:1995
Metallic coatings. Hot dip galvanized coatings on ferrous materials. Gravimetric determination of the mass per unit area
ISO 1461:1999
Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test methods
ISO 1463:1995
Metallic and oxide coatings. Measurement of coating thickness. Microscopical method
ISO 1478:2000
Tapping screw thread
ISO 1479:1995
Specification for hexagon-head tapping screws
ISO 1481:1995
Specification for slotted pan-head tapping screws
ISO 1482:1995
Specification for slotted countersunk (flat) head tapping screws (common head style)
ISO 1483:1995
Slotted raised countersunk (oval) head tapping screws (common head style)
ISO 1496-2:1996
Series 1 freight containers. Specification and testing. Thermal containers
ISO 1496-3:1995
Series 1 freight containers. Specification and testing. Tank containers for liquids, gases and pressurized dry bulk
ISO 1496-4:1991
Series 1 freight containers. Specification and testing. Non-pressurized containers for dry bulk
ISO 1505:1993
Textile machinery. Widths relating to dyeing and finishing machines. Definitions and range of nominal widths
ISO 1513:1995
Paints and varnishes. Examination and preparation of samples for testing
ISO 1514:1997
Paints and varnishes. Standard panels for testing
ISO 1516:2002
Method of test for petroleum and its products. Determination of flash/no flash. Closed cup equilibrium method
ISO 1517:1995
Paints and varnishes. Surface-drying test. Ballotini method
ISO 1518:2001
Paints and varnishes. Scratch test
ISO 1519:2002
Paints and varnishes. Bend test (cylindrical mandrel)
ISO 1520:2001
Paints and varnishes. Cupping test
ISO 1522:2001
Paints and varnishes. Pendulum damping test
ISO 1523:2002
Method of test for petroleum and its products. Determination of flash point. Closed cup equilibrium method
ISO 1524:2002
Paints, varnishes and printing inks. Determination of fineness of grind
ISO 1530:2003
Fishing nets. Description and designation of knotted netting
ISO/IEC 1539-1:1997
Information technology. Programming languages. FORTRAN. Base language
ISO/IEC 1539-2:2000
Information technology. Programming languages. FORTRAN. Varying length character strings
ISO/IEC 1539-3:1999
Information technology. Programming languages. FORTRAN. Conditional compilation
ISO 1559:2001
Dental materials. Alloys for dental amalgam
ISO 1561:1998
Dental casting wax
ISO 1562:1995
Dental casting gold alloys
ISO 1564:1999
Dental aqueous impression materials based on agar
ISO 1567:2001
Dentistry. Denture base polymers
ISO 1580:1994
Slotted pan head screws. Product grade A
ISO 1597:2000
Plastics. Unplasticized cellulose acetate. Determination of acetic acid yield
ISO 1598:2000
Plastics. Cellulose acetate. Determination of insoluble particles
ISO 1599:1999
Plastics. Cellulose acetate. Determination of viscosity loss on moulding
ISO 1600:1999
Plastics. Cellulose acetate. Determination of light absorption of moulded specimens produced using different periods of heating
ISO 1622-1:2000
Plastics. Polystrene (PS) moulding and extrusion materials. Designation system and basis for specifications
ISO 1622-2:1999
Plastics. Polystrene (PS) moulding and extrusion materials. Preparation of test specimens and determination of properties
ISO 1624:2002
Plastics. Vinyl chloride homopolymer and copolymer resins. Sieve analysis in water
ISO 1628-1:1998
Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers. General principles
ISO 1628-2:2000
Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers. Poly(vinyl chloride) resins
ISO 1628-3:2000
Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers. Polyethylenes and polypropylenes
ISO 1628-5:1998
Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers. Thermoplastic polyester (TP) homopolymers and copolymers
ISO 1629:1995
Rubbers and latices. Nomenclature
ISO 1641-1:2003
End mills and slot drills. Milling cutters with cylindrical shanks
ISO 1641-3:2003
End mills and slot drills. Milling cutters with 7/24 taper shanks
ISO 1660:1996
Technical drawings. Dimensioning and tolerancing of profiles
ISO 1666:1998
Starch. Determination of moisture content. Oven-drying method
ISO 1675:1998
Plastics. Liquid resins. Determination of density by the pyknometer method
ISO 1680:2000
Acoustics. Test code for the measurement of airborne noise emitted by rotating electrical machinery
ISO 1700:1988
Cinematography. 8 mm type S motion-picture raw stock film. Cutting and perforating dimensions
ISO 1716:2002
Reaction to fire tests for building products. Determination of the heat of combustion
ISO 1736:2000
Dried milk and dried milk products. Determination of fat content. Gravimetric method (Reference method)
ISO 1737:2000
Evaporated milk and sweetened condensed milk. Determination of fat content. Gravimetric method (Reference method)
ISO 1741:1995
Dextrose. Determination of loss in mass on drying. Vacuum oven method
ISO 1746:2001
Rubber or plastics hoses and tubing. Bending tests
ISO 1754:1998
Photography. Cameras using 35 mm film and roll film. Picture sizes
ISO 1762:2001
Paper, board and pulps. Determination of residue (ash) on ignition at 525$0DC
ISO 1766:1999
Textile floor coverings. Determination of thickness of pile above the substrate
ISO 1781:1983
Cinematography. Projector usage of 8 mm type S motion-picture film for direct front projection
ISO 1785:1983
Cinematography. Printed 8 mm, Type S, image area on 16 mm motion-picture film perforated 8 mm, Type S (1-4). Position and dimensions
ISO 1787:1984
Cinematography. Camera usage of 8 mm Type S motion-picture film. Specifications
ISO 1795:2000
Rubber, raw natural and raw synthetic. Sampling and further preparative procedures
ISO 1797-1:1995
Dental rotary instruments. Shanks. Shanks made of metals
ISO 1797-2:1995
Dental rotary instruments. Shanks. Shanks made of plastics
ISO 1798:2000
Flexible cellular polymeric materials. Determination of tensile strength and elongation at break
ISO 1803:1997
Building construction. Tolerances. Expression of dimensional accuracy. Principles and terminology
ISO 1806:2002
Fishing nets. Determination of mesh breaking force of netting
ISO 1817:1999
Rubber, vulcanized. Determination of the effect of liquids
ISO 1834:1999
Short link chain for lifting purposes. General conditions of acceptance
ISO 1837:2003
Lifting hooks. Nomenclature
ISO 1854:2000
Whey cheese. Determination of fat content. Gravimetric method (reference method)
ISO 1856:2001
Flexible cellular polymeric materials. Determination of compression set
ISO/IEC 1863:1990
Information processing. 9-track, 12,7 mm (0,5 in) wide magnetic tape for information interchange using NRZ1 at 32 ftpmm (800 ftpi). 32 cpmm (800 cpi)
ISO 1872-1:1999
Polyethylene (PE) moulding and extrusion materials. Designation system and basis for specifications
ISO 1872-2:1997
Polyethylene (PE) moulding and extrusion materials. Preparation of test specimens and determination of properties
ISO 1873-1:1995
Plastics. Polypropylene (PP) moulding and extrusion materials. Designation system and basis for specifications
ISO 1873-2:1997
Plastics. Polypropylene (PP) moulding and extrusion materials. Preparation of test specimens and determination of properties
ISO 1874-1:2001
Plastics. Polyamide (PA) moulding and extrusion materials. Designation
ISO 1874-2:1996
Plastics. Polyamide (PA) moulding and extrusion materials. Preparation of test specimens and determination of properties
ISO 1886:1995
Reinforcement fibres. Sampling plans applicable to received batches
ISO 1887:1995
Textile glass. Determination of combustible-matter content
ISO 1888:1996
Textile glass. Staple fibres or filaments. Determination of average diameter
ISO 1889:1997
Reinforcement yarns. Determination of linear density
ISO 1890:1997
Reinforcement yarns. Determination of twist
ISO 1919:1998
Road vehicles. M14 x 1,25 spark plugs with flat seating and their cylinder head housings
ISO 1922:2001
Rigid cellular plastics. Determination of shear strength
ISO 1923:1995
Cellular plastics and rubbers. Determination of linear dimensions
ISO 1924-2:1995
Paper and board. Determination of tensile properties. Constant rate of elongation method
ISO 1925:2001
Mechanical vibration. Balancing. Vocabulary
ISO 1942-5:1995
Dental vocabulary. Terms associated with testing
ISO 1957:2000
Machine-made textile floor coverings. Selection and cutting of specimens for physical tests
ISO 1973:1996
Textile fibres. Determination of linear density. Gravimetric method and vibroscope method
ISO 1977:2000
Conveyor chains, attachments and sprockets
ISO 1984-1:2001
Test conditions for manually controlled milling machines with table of fixed height. Testing of the accuracy. Machines with horizontal spindle
ISO 1984-2:2001
Test conditions for manually controlled milling machines with table of fixed height. Testing of the accuracy. Machines with vertical spindle
ISO 1985:1998
Machine tools. Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table. Testing of the accuracy
ISO 1986-1:2001
Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table. Testing of the accuracy. Machines with a table length of up to 1600mm
ISO/IEC 1989:2002
Information technology. Programming languages. COBOL
ISO 1997:1992
Granulated cork and cork powder. Classification, properties and packing
ISO 1998-1:1998
Petroleum industry. Terminology. Raw materials and products
ISO 1998-2:1998
Petroleum industry. Terminology. Properties and tests
ISO 1998-3:1998
Petroleum industry. Terminology. Exploration and production
ISO 1998-4:1998
Petroleum industry. Terminology. Refining
ISO 1998-5:1998
Petroleum industry. Terminology. Transport, storage, distribution
ISO 1998-6:2000
Petroleum industry. Terminology. Measurement
ISO 1998-7:1998
Petroleum industry. Terminology. Miscellaneous terms
ISO 1998-99:2000
Petroleum industry. Terminology. General and index